IOT 제품 > 전자부품
레인보우 LED 드라이버 쉴드 - Atmega 328
레인보우 LED 드라이버 쉴드 - Atmega 328
 

레인보우 LED 드라이버 쉴드 - Atmega 328
Rainbowduino LED driver platform - Atmega 328
 


 

The Rainbowduino board (V3.0) is an Arduino compatible controller board with professional multiplexed LED driver. It can drive a 8x8 RGB Led Matrix or a 4x4x4 RGB LED Cube in common Anode mode. Rainbowduino v3.0 uses two MY9221 chips which is a 12-channels (R/G/B x 4) constant current Adaptive Pulse Density Modulation(APDM). Rainbowduino v3.0 has provisions for cascading more such boards with I2C interface.
Rainbowduino v3.0 is flashed with Arduino boot-loader and this makes it easy to program sketches using Arduino IDE. Unlike other LED drivers, this comes with a USB to UART (FT232RL) inbuilt for programming the sketches.

레인보우 LED 드라이버 쉴드 - Atmega 328


    • Features
              • Provides 2 x 16 pin header for connecting multiplexed LEDs
              • Constant current(20.8mA) LEDs driver.
              • Can drive 4x4x4 RGB LED Cube or 8x8 RGB LED Matrix (i.e 192 LED)
              • Built in USB to UART chip (FT232RL)
              • Built in 5V / 1 Ampere voltage regulator
              • Can be driven directly via USB cable (No external power adapter needed)
              •  
이전글
8x8 칼라 도트 메트릭스 - Compatible with Rainbowduino 2014/07/12
8x8 칼라 도트 메트릭스 - Square LED Dot 2014/07/12
다음글
60mm 8x8 2칼라 도트 메트릭스 2014/07/14
LED Bar 모듈 2014/07/14