IOT 제품 > 디스플레이
네오픽셀 스틱 - 8 픽셀 NeoPixel Stick - 8 x WS2812 5050 RGB LED with Integrated Drivers
 

네오픽셀 스틱 - 8 픽셀
NeoPixel Stick - 8 x WS2812 5050 RGB LED with Integrated Drivers
 

NeoPixel Stick - 8 x WS2812 5050 RGB LED with Integrated Drivers

NeoPixel Stick - 8 x WS2812 5050 RGB LED with Integrated Drivers

 

 
Description

  • Make your own little LED strip arrangement with this stick of NeoPixel LEDs. We crammed 8 of the tiny 5050 (5mm x 5mm) smart RGB LEDs onto a PCB with mounting holes and a chainable design. Use only one microcontroller pin to control as many as you can chain together! Each LED is addressable as the driver chip is inside the LED. Each one has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and no external choke resistors are required making the design slim. Power the whole thing with 5VDC (4-7V works) and you're ready to rock.

    The LEDs are 'chainable' by connecting the output of one stick into the input of another - see the photo above. There is a single data line with a very timing-specific protocol. Since the protocol is very sensitive to timing, it requires a real-time microconroller such as an AVR, Arduino, PIC, mbed, etc. It cannot be used with a Linux-based microcomputer or interpreted microcontroller such as the netduino or Basic Stamp. Our wonderfully-written Neopixel library for Arduino supports these pixels! As it requires hand-tuned assembly it is only for AVR cores but others may have ported this chip driver code so please google around. An 8MHz or faster processor is required.

    Comes as a single stick with 8 individually addressable RGB LEDs assembled and tested.

    Our detailed NeoPixel Uberguide has everything you need to use NeoPixels in any shape and size. Including ready-to-go library & example code for the Arduino UNO/Duemilanove/Diecimila, Flora/Micro/Leonardo, Trinket/Gemma, Arduino Due & Arduino Mega/ADK (all versions)










 

Technical Details

WS2812 Datasheet

  • Dimensions: 51.10mm / 2" x 10.22mm / 0.4" x 3.19mm / 0.12"
  • Weight: 2.57g
  • We currently ship this product with the WS2812B 4-pin chip LED installed. Previous versions may have come with the WS2812S 6-pin LED. Both B and S LEDs can be chained together and are compatible with the NeoPixel Libary. The 'B chip type adds additional polarity protection and is the same brightness as the 'S type.

이전글
LED 메트릭스 아두이노 쉴드 Shield Matrix 2015/06/19
초박형 16x32 레드 LED 매트릭스 패널 Ultrathin 16x32 Red LED Matrix Panel 2015/06/19
다음글
아두이노 플라스틱 고정대 Plastic mounting plate for breadboard and Arduino - rubber feet! 2015/06/19
브레드보드 ( 165 x 55 x 8.5 mm ) Basic Bread board - 16.5*5.5 cm 2015/06/19