IOT 제품 > 전자부품
리튬이온폴리머 배터리 - 3.7V/110mAh ( Lithium Ion Polymer Battery - 3.7v 100mAh )
 

리튬이온폴리머 배터리 - 3.7V/110mAh
 

리튬이온폴리머 배터리 - 3.7V/110mAh
 
Description

Lithium ion polymer (also known as 'lipo' or 'lipoly') batteries are thin, light and powerful. The output ranges from 4.2V when completely charged to 3.7V. This battery has a capacity of ~100mAh for a total of about 0.4 Wh. If you need a larger battery, we have a full range of bigger cells

The batteries come pre-attached with a genuine 2-pin JST-PH connector as shown and include the necessary protection circuitry. Because they have a genuine JST connector, not a knock-off, the cable wont snag or get stuck in a matching JST jack, they click in and out smoothly.

The included protection circuitry keeps the battery voltage from going too high (over-charging) or low (over-use) which means that the battery will cut-out when completely dead at 3.0V. It will also protect against output shorts. However, even with this protection it is very important that you only use a LiIon/LiPoly constant-voltage/constant-current charger to recharge them and at a rate of 100mA or less. We suggest our Micro Lipo charger, which has a 100mA default rate.
Like most lipos, the batteries we sell do not have thermistors built in. This is why we suggest charging at 1 C or even less - 100mA is a good rate, and available from any USB port if using a USB-powered charger

Additional safety notes: Do not use a NiMH/NiCad/lead-acid charger! Also, do not abuse these batteries, do not short, bend, crush or puncture. As with all Lithium ion polymer batteries and with any power source - they should be used by experts who are comfortable working with power supplies.


Technical Details

Details:

  • Weight: 3g
  • Size: 11.5mm x 31 x 3.8mm / 0.45" x 1.2" x 0.15"
  • JST-PH Connector Length: 105mm / 4.1"
  • Output: 100mAh at 3.7V nominal
이전글
리튬이온폴리머 배터리 - 3.7V/150mAh ( Lithium Ion Polymer Battery - 3.7v 150mAh ) 2015/06/19
플랙시블 태양전지 패널 - 2V 0.5W ( 2V 0.5W Thin-film Flexible Solar Panel ) 2015/06/19
다음글
9V 배터리 출력 - 원통형 전원 잭 변환 어댑터 ( 9V to Barrel Jack Adapter ) 2015/06/19
3 x AAA 배터리 홀더( On/Off 스위치, 2P JST 컨넥터 ) ( 3 x AAA Battery Holder with On/Off Switch and 2-Pin JST ) 2015/06/19