IOT 제품 > 전자부품
3 x AAA 배터리 홀더( On/Off 스위치, 2P JST 컨넥터 ) ( 3 x AAA Battery Holder with On/Off Switch and 2-Pin JST )
   

3 x AAA 배터리 홀더( On/Off 스위치, 2P JST 컨넥터 )
3 x AAA Battery Holder with On/Off Switch and 2-Pin JST

3 x AAA Battery Holder with On/Off Switch and 2-Pin JST

Description

  • This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. We spec'd these out because the box is slim, and 3 AAA's add up to about 3.3-4.5V, a very similar range to Lithium Ion/polymer (Li-Ion) batteries and have an on-off switch. That makes them ideal for use with 3.3V projects that have a 2-pin JST connector meant for one of our Li-Ion/Poly batteries. (Of course, you can't recharge them like Li-Ion/Polys, so don't try to plug this into one of our Li-Ion/Poly charger boards!)

    Fits any standard AAA battery. When using rechargeable NiMH the output voltage will range from about 3.7V with charged batteries to 2.7V at the end of life with a nominal voltage of 3.6V. When using alkalines, the output will range from 4.6V with new batteries to 3.3V at the end of life with a nominal voltage of about 4.5V

    The polarity matches that of our 2-pin JST cable and Li-Ion/Poly batteries. Uses a genuine JST connector so it wont 'catch and tear' in JST connectors.

 

 

Technical Details

Box Dimensions: 2.5" x 1.45" x 0.62"
Cable: 6" long, terminated with a genuine JST-PH 2 pin connector

이전글
9V 배터리 출력 - 원통형 전원 잭 변환 어댑터 ( 9V to Barrel Jack Adapter ) 2015/06/19
리튬이온폴리머 배터리 - 3.7V/110mAh ( Lithium Ion Polymer Battery - 3.7v 100mAh ) 2015/06/19
다음글
2 x 2032 코인 셀 배터리 홀더( 6V 출력, On/Off 스위치 ) 2015/06/19
JST-PH 소켓 배터리 확장 케이블 - 500mm ( JST-PH Battery Extension Cable - 500mm ) 2015/06/19