IOT 제품 > 전자부품
2 x 2032 코인 셀 배터리 홀더( 6V 출력, On/Off 스위치 )
 

2 x 2032 코인 셀 배터리 홀더( 6V 출력, On/Off 스위치 )
2 x 2032 Coin Cell Battery Holder - 6V output with On/Off switch
 

2 x 2032 Coin Cell Battery Holder - 6V output with On/Off switch

2 x 2032 Coin Cell Battery Holder - 6V output with On/Off switch

2 x 2032 Coin Cell Battery Holder - 6V output with On/Off switch
 


 
Description

This tiny coin cell battery holder is ideal for small portable or wearable projects. It holds two 20mm coin cells (2032 are the most popular size) in series to generate 6V nominal. (If you want only 3V, we suggest sticking a crumpled piece of tin foil in one of the slots.) 20mm coin cells are popular as they are used in keychain lights, so they are easy to get, and fairly low cost. They tend to have about 220mAh capacity so this holder would give you 6V @ 220mAh with two cells.

The holder is made of plastic and snaps open and closed. You can tape it closed if you need more security than just the plastic snap. A nice extra is the on/off switch up top. We had the factory place a 2mm JST PH connector on the end but you can cut it off if you want to solder on a different connector.

This item does not include any 2032 coin cells. We do stock those separately, so if you want batteries to go with this, please pick up two of them!

 
Technical Details

  • Weight: 4.7 grams when empty, 10.5 grams with two 2032 batteries installed
  • Size: 53mm x 23mm x 6mm
  • 6" long (150mm) wires

 

이전글
3 x AAA 배터리 홀더( On/Off 스위치, 2P JST 컨넥터 ) ( 3 x AAA Battery Holder with On/Off Switch and 2-Pin JST ) 2015/06/19
9V 배터리 출력 - 원통형 전원 잭 변환 어댑터 ( 9V to Barrel Jack Adapter ) 2015/06/19
다음글
JST-PH 소켓 배터리 확장 케이블 - 500mm ( JST-PH Battery Extension Cable - 500mm ) 2015/06/19
EL 와이어用 4xAAA 포켓 인버터 ( EL wire 4xAAA pocket inverter ) 2015/06/19