IOT 제품 > 전자부품
EL Wire Coin Cell Mini Inverter
 

EL Wire Coin Cell Mini Inverter

EL Wire Coin Cell Mini Inverter

EL Wire Coin Cell Mini Inverter

EL Wire Coin Cell Mini Inverter
 

 
Description

  • A really tiny portable inverter for EL wire. Powers off of a single CR2032 coin battery (not included!), it can drive up to 50cm / 20 inches of our high-brightness EL wire or 10cm x 1cm long piece of EL tape for 3 hours (or longer if the EL wire is less than 50cm long). There is a button for selecting steady/blink/off modes. Comes with a 2.5mm pitch female JST connector. Like all inverters we've used, the 2000 Hz oscillation is slightly audible.

    This inverter can only power 10 CENTIMETERS (2.5 INCHES) of 1cm wide tape or a 3cm x 3cm / 1.25" x 1.25" piece of EL panel

    To connect a piece EL wire to this, you'll want a male connector wire

    Soldering to EL wire is a little tricky but luckily we wrote a detailed step-by-step tutorial!








 

Technical Details

Dimensions:

  • Dimensions: 46mm x 24mm x 10mm / 1.8" x .9" x .4"
  • Cable Length: 75mm / 3.0"
  • Weight: 10g

이전글
In-line power cable 1 meter long extension cord (for EL wire) 2015/06/19
전도성 고무코드 인장 센서 ( Conductive Rubber Cord Stretch Sensor + extras ) 2015/06/19
다음글
12V EL wire/tape inverter 2015/06/19
In-line power wire connector (male) 2015/06/19