IOT 제품 > 전자부품
In-line wire 1-to-4 splitter
 

In-line wire 1-to-4 splitter
 

In-line wire 1-to-4 splitter

In-line wire 1-to-4 splitter

 

 
Description

  • If you want to connect multiple EL wires/strips/panels up to one inverter, these splitters are quite useful. There is one male connector (goes to the inverter) and then 4 female connectors (which will connect to each wire/strip/panel. You can even cascade them! Only thing to watch for is make sure that the total length of EL does not exceed what the inverter can drive!

    These are for EL only! EL is 'AC' powered so there is no 'polarity' on the wires - the polarity of the pins may not line up right if you're using with anything other than EL. The wires may be 'swapped' on the 4 ends - so be super-aware of that.





 

Technical Details

Using EL wire is a little tricky but luckily we wrote a detailed step-by-step tutorial!

이전글
In-line power wire connector (male) 2015/06/19
12V EL wire/tape inverter 2015/06/19
다음글
Silicone Clips and Screws for NeoPixel LED Strips - set of 5 2015/06/19
2.1mm 어댑터 잭 - 2극 터미널 변환 어댑터 ( Female DC Power adapter - 2.1mm jack to screw terminal block ) 2015/06/19