IOT 제품 > 디스플레이
레인보우 큐브 키트 ( 조립키트 ) ( Rainbow Cube kit- RGB 4X4X4 (Rainbowduino Compatible) )

레인보우 큐브 키트( 조립키트 )는 하나하나 DIY로 부품을 조립하여 완성 할 수 있도록 구성되어 있는 제품입니다. 납땜에 자신이 있으신 분은 원리를 이해하면서 조립하는 재미를 느낄수 있는 레인보우 큐브 키트입니다. 꼬박 반나절은 조립해야 합니다. ^^ 귀차니즘이나 조립에 자신이 없으신 분은 완성품을 구매 하세요~

Rainbow Cube kit- RGB 4X4X4
( Rainbowduino Compatible )
This is a kit of 4x4x4 RGB LEDs cube, containing 648mm RGB LEDs, custom PCBs and all supporting components (6 free alternate LEDs are included in the kit). All parts are well packed in a nice package.

Compare with other similar projects, this one comes with super slim frame PCB design which not only looks very beautiful but also makes the assembly much easier.
You can control all LEDs of the Rainbowcube either by changing the Arduino program itself or by using the easy to use control Software.

You need some basic soldering skill to make this kit.
The Rainbowcube can be controlled by any kind of microcontroller but because it is a little bit complicated we strongly recommend that you are using the Rainbowduino to control the cube.
The Rainbowduino includes already all necessary drivers and connections and can be directly attached at the bottom of the Rainbowcube. Rainbowduino is not included in kit

조립 칼라 3D 큐브

조립 칼라 3D 큐브

조립 칼라 3D 큐브


  • Kit Include

  • 8mm RGB LED x70
  • Cube Panel X1
  • Slim Panel PCB X4
  • Side A slim PCB X4
  • Side B slim PCB X4
  • 2.54mm 40pin male header X5
  • 2.54mm 40pin female header X2
  • 2.54mm 16pin female header X3
  • 2.0mm 10pin female header X2
  • 8pin female header X5
  • 2X3 female header X1
  • JST power cable X1
  • 3.5mm 4pin green terminal X1
  • 3.5mm DC jack X1
  • 3mm LED red X1
  • 3mm LED green X1
  • 1K 1/8w resistor X4
  • 10k 1/8w resistor X1
  • 15k 1/8w resistor X1
  • linear voltage regulator X1
  • 10uF_16v_E-CAP X2
레인보우 큐브 키트 (완성품) ( Rainbow Cube Kit (Assembled) ) 2015/06/19
태양열 모터 자동차 ( Volta Racers Solar Motorcar Kit - Gray ) 2015/06/19
Multi Chassis-4WD Robot Kit (ATV version) 2015/06/19
Seeeduino V3.0 (Atmega-328P) 2015/06/19