IOT 제품 > 전자부품
12mm 코인셀 베터리 브레이크 아웃 ( On-Off 스위치 장착 ) ( 12mm Coin Cell Breakout w/ On-Off Switch )
 

12mm 코인셀 베터리 브레이크 아웃 ( On-Off 스위치 장착 )
 

12mm Coin Cell Breakout w/ On-Off Switch

12mm Coin Cell Breakout w/ On-Off Switch

12mm Coin Cell Breakout w/ On-Off Switch

Description

  • Simple but effective - this breakout board has a CR1220 coin cell battery holder soldered on, an on/off switch and 0.1" pitch breakout pins for easy connecting. Great for powering very low-current projects, or adding a battery backup circuit to a real-time-clock or similar. There's two ground pins, one 'switched' power pin, and one pin that is always on.

    Comes with one fully assembled and tested breakout plus a small stick of 0.1" header so you can solder it on and plug into a breadboard.

    We also have a version without a switch


     
Technical Details

Dimensions:

  • 25mm x 23mm x 1.5mm / 1" x 0.9" x 0.06"
  • Mounting hole distance: 18mm x 16mm / 0.7" x 0.6"
  • Weight: 2g

이전글
12mm 코인셀 베터리 브레이크 아웃 ( 12mm Coin Cell Breakout Board ) 2015/06/21
5mW 레이져 모듈 발광부 - (출력: 적색 line) ( 5mW Laser Module emitter - Red Line ) 2015/06/21
다음글
인텔 에디슨 아두이노 확장보드 KIT ( Intel® Edison for Arduino ) 2015/06/21
인텔 에디슨 미니브레이크아웃 KIT ( Intel® Edison Breakout Kit ) 2015/06/21