IOT 제품 > 디스플레이
네오픽셀 네오메트릭스 8x8 - 64 RGB LED 픽셀 메트릭스 ( Adafruit NeoPixel NeoMatrix 8x8 - 64 RGB LED Pixel Matrix )

네오픽셀 네오메트릭스 8x8 - 64 RGB LED 픽셀 메트릭스

Adafruit NeoPixel NeoMatrix 8x8 - 64 RGB LED Pixel Matrix

아두이노 네오픽셀 64개 REB LED 메트릭스 실드

아두이노 네오픽셀 64개 REB LED 메트릭스 실드

아두이노 네오픽셀 64개 REB LED 메트릭스 실드


  • Put on your sunglasses before wiring up this LED matrix - 64 eye-blistering RGB LEDs adorn the NeoMatrix for a blast of configurable color. Arranged in an 8x8 matrix, each pixel is individually addressable. Only one microcontroller pin is required to control all the LEDs, and you get 24 bit color for each LED.

    Wiring it up is easy: there are two 3-pin connection ports. Solder wires to the input port and provide 5VDC to the +5V and ground pins, then connect the DIN pin to your microcontroller. If you're using our NeoPixel Arduino library, use digital #6. You'll also need to make a common ground from the 5V power supply to the microcontroller/Arduino. Since each LED can draw as much as 60mA (thats up to 3.5 Amps per panel if all LEDs are on bright white!) we suggest our 5V 2A power supply. For most uses, you'll see about 1-2A of current per panel.

    If, say, you need MORE blinky, you can chain these together. For the second shield, connect the DIN connection to the first panel's DOUT. Also connect a ground pin together and power with 5V. There you go! You can chain as many as you'd like although after 4 or more panels you may run low on RAM if you're using an UNO. Watch your power usage too, you may need a 5V 10A power supply for so many of these!

    There is a single data line with a very timing-specific protocol. Since the protocol is very sensitive to timing, it requires a real-time microconroller such as an AVR, Arduino, PIC, mbed, etc. It cannot be used with a Linux-based microcomputer or interpreted microcontroller such as the netduino or Basic Stamp. Our wonderfully-written Neopixel library for Arduino supports these pixels! As it requires hand-tuned assembly it is only for AVR cores but others may have ported this chip driver code so please google around. An 8MHz or faster processor is required.

    Our detailed NeoPixel Uberguide has everything you need to use NeoPixels in any shape and size. Including ready-to-go library & example code for the Arduino UNO/Duemilanove/Diecimila, Flora/Micro/Leonardo, Trinket/Gemma, Arduino Due & Arduino Mega/ADK (all versions)

Adafruit NeoPixel NeoMatrix 8x8 - 64 RGB LED Pixel Matrix (6:25)

Technical Details

  • Dimensions: 71.17mm / 2.8" x 71.17mm / 2.8" x 3.28mm / 0.12"
  • Weight: 24.21g
  • We currently ship this product with the WS2812B 4-pin chip LED installed. Previous versions may have come with the WS2812S 6-pin LED. Both B and S LEDs can be chained together and are compatible with the NeoPixel Libary. The 'B chip type adds additional polarity protection and is the same brightness as the 'S type.

미니 적외선 리모컨 ( Mini Remote Control ) 2015/06/21
HDMI 5인치 800x480 Display Backpack - no Touch ( HDMI 5 inch Display Backpack - Without Touch ) 2015/06/21
Adafruit PCB Ruler v2 - 6인치 ( SMD 부품사이즈 판독기 ) 2015/06/21
RGB 컬러센서 + 적외선필터 + LED 조명 - TCS3472, I2C ( RGB Color Sensor with IR filter and White LED - TCS34725 2015/06/21