IOT 제품 > 센서
미세먼지 센서 모듈( P2Y1010AU0F ) ( Sharp GP2Y1010AU0F Compact optical Dust Sensor + Dust Sensor Adapter )
 

미세먼지 센서 모듈( P2Y1010AU0F )
 

샤프 GP2Y1010AU0F 소형 광학 먼지 센서 + 먼지 센서 어댑터

샤프 GP2Y1010AU0F 소형 광학 먼지 센서 + 먼지 센서 어댑터

샤프 GP2Y1010AU0F 소형 광학 먼지 센서 + 먼지 센서 어댑터
 


Introduction
  •  

    Sharp optical dust sensor has an internal infrared diode and a phototransistor diagonally arranged. The diode projects light and the phototransistor detects the dark spots caused by the fine particles passing through. In addition to this feature, depending on the pulse pattern outputted you can check whether or not is smoke or dust.

    This is the sensor you will need if you want to measure air particles, build an air purifier system, or detect certain particles. Includes a special cable to connect with other aplications.

     

  •  
Applications

Detecting of dust in the air. Measure what's going on in the atmosphere.
  • Air purifier. Filter if high amount of particles are detected.
  • Air conditioner system.
  • Air monitor, publish enviromental air quality to the net and compare with your friends.


Specification

Dust Sensor
  • Supply voltage: 5-7V
  • Operating temperature: -10-65 Celsius degree
  • Consumption current: 20mA max, 11mA typical
  • Output of the sensor is an analog voltage proportional to the measured dust density, with a sensitivity of 0.5V/0.1mg/m3.

Adapter

  • Volatge: 5V
  • Size: 27x27mm
  • Integrated LED for power indicator.

On-board silkscreen:
  • A is for analog pin
  • D is for digital pin


Documents


Dust Sensor


Adapter

Dust Sensor Adapter SCH


Shipping List

  • Sharp GP2Y1010AU0F Dust Sensor x1
  • Dust Sensor Adapter x1
  • Adapter cable x1
  • Digital cable x1
  • Analog cable x1

이전글
BMP180 대기압 센서 모듈 ( BMP180 Barometer Module ) 2015/06/22
블루노 액세서리 쉴드 ( Accessory Shield for Bluno ) 2015/06/22
다음글
6xAA Battery Holder with DC2.1 Power Jack 2015/06/23
Wido ( 아두이노 호환 오픈소스 IoT 노드 - WiFi 지원 ) - Open Source IoT Node (Arduino Compatible) 2015/06/23