IOT 제품 > 교육용 KIT
Turtle 2WD Basic Kit - Support IOS Control
 

Turtle 2WD Basic Kit - Support IOS Control
 

Turtle 2WD Basic Kit - Support IOS Control

Turtle 2WD Basic Kit - Support IOS Control

Turtle 2WD Basic Kit - Support IOS Control

Turtle 2WD Basic Kit - Support IOS Control
 


Introduction
  •  

    The Turtle 2WD Basic Kit is a perfect platform to build on and to get started with Arduino Robotics. With just a few simple steps of assembling the hardware and tuning the software, and you'll learn all about Arduino, robotics, sensors, bluetooth communication — as well as obstacle avoidance and remote controlling. You can also take it further with your own code to take advantage of the ultrasonic sensor, Romeo All-in-one Bluetooth Microcontroller, IR sensors and LEDs.

    The Turtle 2WD Mobile Platform is a small, low-cost mobile platform compatible with standard Arduino microcontrollers. It contains two drive motors, wheels (and rear caster ball), frame and all mounting hardware. It is widely used as self-developed control chasis for Arduino platforms and other control boards. The Turtle 2WD has multiple features such as: two differential drives, near zero turning radius, high-strength aluminum alloy body material, motors and a flexible rubber wheel makes it suitable for indoor flat road surface and flat-platform robot completitions. The top layer includes a standard servo socket and the three optional sensor holder. This three sensor holder fits with our adjustable IR range sensor. The servo can be used for a simple rotation platform, a two degrees of freedom camera holder or even a robotic arm.

    Thanks to Romeo BLE, the kit can be controllered by APP (IOS). Simply download an APP (GoBLE) to enjoy the control from you IOS device.




     

     

  •  

Specification

  • Controller: Romeo-BLE
  • Microcontroller: ATmega328P
  • Board: Arduino UNO
  • Controller Operating Voltage: 5V
  • Controller Input Voltage (recommended): 7 ~ 12V
  • Ultrasonic Sensor Detecting range: 4cm-3m (3-5m is possible, but depending on situations)
  • Rotation range: 0 - 180
  • Size(Assembled): 165mm(diameter)*128mm
  • Weight: 480g(Excluding battery)
  • Maximum Load: 500g


Documents




Shipping List

이전글
Wido ( 아두이노 호환 오픈소스 IoT 노드 - WiFi 지원 ) - Open Source IoT Node (Arduino Compatible) 2015/06/23
6xAA Battery Holder with DC2.1 Power Jack 2015/06/23
다음글
BOXZ Romeo BT2.0 Kit 2015/06/23
인텔 에디슨 用 로미오 ( Romeo for Edison Controller (With Intel® Edison) ) 2015/06/23