IOT 제품 > 라즈베리파이
IDC Breakout Helper - 2x20 (40 pin)
 

IDC Breakout Helper - 2x20 (40 pin)
 

IDC Breakout Helper - 2x20 (40 pin)

IDC Breakout Helper - 2x20 (40 pin)

IDC Breakout Helper - 2x20 (40 pin)

IDC Breakout Helper - 2x20 (40 pin)
 

Description

  •  

    The "poor woman's" Raspberry Pi A+ / B+ / Pi 2 cobbler! This combo of 2x20 pin (0.1 spaced) header and socket is for our popular GPIO Ribbon Cable for Raspberry Pi Model A+/B+/Pi 2 (40 pins). It comes in two parts, a 'pin-through' socket and a male header. The socket straddles the center of a breadboard or Perma-Proto and then header plugs into the top of the socket. Since IDC cables are so standard, but a royal pain to use with breadboards, this is a good and cheap hack for prototyping

    Works best when soldered in place. We have used these to prototype on a solderless breadboard but some customers report their breadboards don't play nice with the shorter pins so your mileage may vary.

    Each order comes with one socket and one header. Breadboard, Perma Proto and IDC cable not included!

     


    Technical Details

    • Dimensions (assembled): 51mm x 8mm x 17mm / 2" x 0.3" x 0.7"
    • Dimensions (header): 51mm x 5mm x 12mm / 2" x 0.2" x 0.5"
    • Dimensions (socket): 51mm x 8mm x 8mm / 2" x 0.3" x 0.3"
    • Weight (assembled): 4.5g

이전글
Adafruit Perma-Proto HAT for Pi Mini Kit - With EEPROM 2015/06/25
아두이노 27종 센서 모듈 세트 ( 27 Pcs Sensor Set for Arduino ) 2015/06/25
다음글
7인치 테블릿 및 소형 디스플레이 거치대 ( Adjustable Bent-Wire Stand - up to 7인치 Tablets and Small Screens ) 2015/06/25
HDMI 5인치 800x480 Display Backpack ( 터치 스크린 ) 2015/06/25