IOT 제품 > 디스플레이
HDMI 4 Pi: 7인치 Display 1280x800 IPS - HDMI/VGA/NTSC/PAL
 

HDMI 4 Pi: 7인치 Display 1280x800 IPS - HDMI/VGA/NTSC/PAL
 

HDMI 4 Pi: 7인치 Display 1280x800 IPS - HDMI/VGA/NTSC/PAL

HDMI 4 Pi: 7인치 Display 1280x800 IPS - HDMI/VGA/NTSC/PAL

HDMI 4 Pi: 7인치 Display 1280x800 IPS - HDMI/VGA/NTSC/PAL

HDMI 4 Pi: 7인치 Display 1280x800 IPS - HDMI/VGA/NTSC/PAL

HDMI 4 Pi: 7인치 Display 1280x800 IPS - HDMI/VGA/NTSC/PAL


 

Description

  • 라브베리 파이에서 config.txt 파일에서 HDMI 설정을 오렌지색 부분의 코드라인을 추가해야 합니다. 파일위치는 (/boot/config.txt) 수정 후 리부팅 하시면 해상도에 맞게 동작 가능합니다.



     

    Make a lovely video setup with a 7" IPS screen at 1280x800. Here we have a beautiful bright 7" TFT display with incredibly high resolution and great angle-visibility! We tried to get the thinnest, brightest, highest resolution display that would be good for embedded computing usage. The visible display measures 7" diagonal and is a 'raw LVDS' display as is used in a tablet which makes it ultra thin and very bright. We include a driver board with HDMI, VGA and Composite inputs. The setup is very easy to use - simply connect a 5 to 9VDC adapter to the 2.1mm center-positive DC jack, then connect a digital video source to one of the ports . Voilà, a display!

    This version does not come with audio output Click here if you're looking for a display with audio and speaker drivers

    There's a little wired PCB with little buttons that let you enter a menu system for adjusting brightness, color and contrast. It tries to auto-detect which input you have and switches to that one or you can 'select' from the menu which to display.

    To demonstrate it, we took some photos with the display connected to a Raspberry Pi, but it will also work connected to any device with HDMI, VGA or NTSC/PAL output. It will not work with a device that only outputs DVI (without a DVI to HDMI converter) or SECAM.

    For use with a Raspberry Pi we suggest editing config.txt to set the HDMI to native 1280x800 in case it doesn't detect the resolution properly. You can see our suggested config.txt in the Technical details tab. The easiest way to edit the config.txt is to put the Pi SD card into an every day computer and edit config.txt with any text editor and save.

    For use with a BeagleBone Black running Ubuntu/Debian, we found it works when plugged in, no configuration required.

    A power adapter is NOT included. You will need to either purchase a 5-9VDC adapter or you can use one you've already got around the house. We show the display on a bent wire stand which is not included, but you can pick one up here.


     


    Technical Details

    • Driver Datasheet
    • Keyboard Datasheet
    • Dimensions of Screen: 105mm x 160mm x 3mm / 4.1" x 6.3" x 0.1"
    • Weight of Screen: 91g
    • Power with 5 to 9 VDC
    • ~500mA power draw at 9V
    • 16:10 display ratio
    • Resolution: 1200 x 800
    • Visible area: 150mm x 95mm 16:10
    • Display dimensions: 162mm x 104mm x 4mm (6.4" x 4.1" x 0.2")
    • Brightness: 400cd/m2
    • Contrast: 800:1
    • Uses an HSD070PWW1 display
    • Weight (excluding power cable): 290g/10.2oz
    • Not HDCP compatible - it cannot be used with 'secured' HDMI sources

    Power draw from combined display+HDMI driver when backlight is on

    • 5V: 980mA
    • 6V: 780mA
    • 7V: 660mA
    • 8V: 575mA
    • 9V: 515mA
  •  
  • User Guide
  •  
  • For more information on this HDMI display, including a suggested config.txt, check out our HDMI Display ÜBERGUIDE!
     

이전글
HDMI 4 Pi: 7인치 Display & Audio 1024x600 - HDMI/VGA/NTSC/PAL 2015/06/25
HDMI 5인치 800x480 Display Backpack ( 터치 스크린 ) 2015/06/25
다음글
라즈베리파이 2 / B+ 블랙 케이스 2015/06/25
Medium 16x32 RGB LED 매트릭스 패널 ( Medium 16x32 RGB LED matrix panel ) 2015/06/25