IOT 제품 > 센서
Panel Temperature Meter ( -30 ~ 70 °C )
 

Panel Temperature Meter ( -30 ~ 70 °C )


Panel Temperature Meter ( -30  ~ 70 °C )

Panel Temperature Meter ( -30  ~ 70 °C )
 



Description

 

Put a temperature meter anywhere with this very handy display. This panel meter displays the temperature of the attached waterproof 1% thermistor in °C. It does require a DC voltage to run, at 4.5-30VDC. It has reverse polarity protection in case you swap the power leads by accident.

To use, simply connect the thin red wire to a positive supply, and the thin black wire to ground. Then tape the black thermistor bulb to whatever you want to measure - or leave it loose to measure ambient temperature. The display has a microcontroller that will read thermistor resistance and display the corresponding temperature from -30°C to 70°C with 1 °C precision on a 3-digit 0.56" tall 7-segment display. The meter draws 3-4mA to power the microcontroller and display. This particular LED display is a nice vivid blue, which we found very readable. To mount to your enclosure, simply cut a 45.5mm × 26.5mm rectangle and snap it in.

This meter can only display the temperature in Centigrade °C, it cannot be modified to °F and we do not have a version that is °F.



Technical Details

Dimensions:

  • Dimensions: 48x29x21mm
  • Digit size: 14mm/0.56" high, blue LEDs
  • Panel cutout: 45.5mm x 26.5mm
  • Power lead length: 15cm
  • Thermistor lead length: 12cm
  • Refresh rate: about 2 Hz

Power specifications:

  • 4.5V to 30V DC measurements
  • 0.1V precision
  • 3-4mA draw
  • Blue LED display
  • Reverse polarity protected

이전글
Pixy CMUcam5 Image Sensor 2015/07/01
360도 레이저 스캐너 개발 키트 (RPLIDAR) ( 360 Degree Laser Scanner Development Kit (RPLIDAR) ) 2015/07/01
다음글
릴레이 모듈 V3.1 ( Relay Module V3.1 - Arduino Compatible ) 2015/07/01
PIR (모션) 센서 ( PIR (Motion) Sensor ) 2015/07/01