IOT 제품 > 디스플레이
디지털 LED 조명 모듈 - 적색 ( Digital RED LED Light Module )
 

디지털 LED 조명 모듈 - 적색 ( Digital RED LED Light Module )

디지털 LED 조명 모듈 - 적색 ( Digital RED LED Light Module )

디지털 LED 조명 모듈 - 적색 ( Digital RED LED Light Module )

디지털 LED 조명 모듈 - 적색 ( Digital RED LED Light Module )
 

 

Introduction
  •  

    This red LED light module has a shiny white color. It is ideal for Arduino starter. This module can be easy to be plugged on IO/Sensor expansion shield.

     

    NOTE: This LED is wired to light up when the Signal pin is set to low. The reason for this is to prevent the LED from demanding too much current from the microcontroller and damaging the I/O.

     

    If you wish to make this LED light up with a logic high, you can switch the Signal wire (Green) with the GND wire (Black) and the Voltage wire (Red) to the Signal wire's original spot.
     


Specification

  • Type: Digital
  • LED light module pin definition : (1) control terminal (2) power supply (3) ground


Document

연결 다이어그램 및 샘플코드



Shipping List

  • Sensor x1
  • Digital Sensor Cable (SKU:FIT0011) x1

이전글
디지털 LED 조명 모듈 - 녹색 ( Digital Green LED Light Module ) 2015/07/01
아날로그 조도 센서 ( Analog Ambient Light Sensor ) 2015/07/01
다음글
디지털 LED 조명 모듈 - 백색 ( Digital White LED Light Module ) 2015/07/01
디지털 LED 조명 모듈 - 청색 ( Digital Blue LED Light Module ) 2015/07/01