IOT 제품 > 아두이노
XBee USB Adapter V2
 

XBee USB Adapter V2
 

XBee USB Adapter V2

XBee USB Adapter V2

 


Introduction
  •  

    The XBee USB Adapter V2 is an update version from DFRobot. It features an Atmega8U2 programmed as a USB-to-serial converter, the same chip found on the Arduino Uno. The Atmega8U2 firmware uses the standard USB COM drivers, and no external driver is needed. However, on Windows, a .inf file is required. It's compatible with all the products using XBee socket. It provides a faster and stable wireless communication for your projects.

     

    The DFRobot Xbee USB adapter is used for the XBee module configuration parameters to facilitate wireless data transmission. It can be easily connected to a PC via mini USB cable. Further, it can be used with XBee-setting support software X-CTU. It can also be used as a USB-TTL adapter.

     

    It is compatible with:

    all XBee modules including the Series 1 and Series 2.5, standard and Pro version
    Bluetooth Bee
    DFRobot Wireless Programming Module
     



Specification

  • ZigBee X-CTU Compatible
  • mini USB cable
  • USB-TTL adapter function
  • Voltage: +5V(USB Power)



Document



Shipping List

  • XBee USB Adapter V2 x1

이전글
Magnet Micro USB Cable 1.2m 2015/07/06
라즈베리파이재단 라즈베리파이 2 / B+ 케이스 ( Pi Foundation Raspberry Pi B+ / Pi 2 Case ) 2015/07/06
다음글
아두이노용 이더넷 쉴드 - W5200 ( Ethernet Shield for Arduino - W5200 ) 2015/07/06
2.8인치 TFT Touch Shield with 4MB Flash for Arduino and mbed 2015/07/06