IOT 제품 > 아두이노
아두이노용 이더넷 쉴드 - W5200 ( Ethernet Shield for Arduino - W5200 )
 

아두이노용 이더넷 쉴드 - W5200 ( Ethernet Shield for Arduino - W5200 )
 

아두이노용 이더넷 쉴드 - W5200 ( Ethernet Shield for Arduino - W5200 )

아두이노용 이더넷 쉴드 - W5200 ( Ethernet Shield for Arduino - W5200 )

아두이노용 이더넷 쉴드 - W5200 ( Ethernet Shield for Arduino - W5200 )

아두이노용 이더넷 쉴드 - W5200 ( Ethernet Shield for Arduino - W5200 )

아두이노용 이더넷 쉴드 - W5200 ( Ethernet Shield for Arduino - W5200 )

Introduction
  •  

    This Arduino-sized Ethernet Shield is based on the Wiznet W5200 Ethernet Chip, and provides an easy way of getting your Arduino Online. Fits all version of arduino Main board,e.g.UNO, mega 2560. To start, just plug this module onto your Arduino board, connect it to your network with an CAT 5 Ethernet Cable (not included) and follow a few simple instructions, you will be able to explore the world with internet. The pin layout also allows another shield to be stacked on top. An aluminum alloy radiator is placed onto W5200 chip to release excessive heat.


     

     

  •  
  •  
  • Features
  •  
  • Directly supported by Arduino official Ethernet Library.
  • Add-on micro-SD card slot, which can be used to store files and accessed via the SD Library.
  • Compatible with the Arduino Uno as well as Mega (2560).
  • The Wiznet W5200 provides a network (IP) stack capable of both TCP and UDP.
  • Supports up to four simultaneous socket connections ( eigth with the upgraded library )
  • Use the Ethernet library to write sketches which connect to the internet using the shield.
  • Aluminum alloy radiator to release excessive heat


Applications

  • Home network device: set top box, PVR, digital media center
  • Serial Ethernet: access control system, LED display, wireless AP repeater, etc.
  • Parallel Ethernet: POS machine or hand-held printer, copier
  • USB Ethernet: storage devices, network printers
  • Security Systems: Network Camera
  • Monitoring equipment
  • Embedded Server


Specification


  • Working voltage: 5v
  • Ethernet socket
  • Support Micro SD card reading / writing
  • Ethernet and SD card sharing the SPI interface, only one function per i
  • Standard size Arduino compatible controller, while supporting Arduino Mega Series
  • Size: 70x55x30mm



Document




Shipping List


  • DFRduino Ethernet Shield for Arduino - W5200 x1

이전글
XBee USB Adapter V2 2015/07/06
Magnet Micro USB Cable 1.2m 2015/07/06
다음글
2.8인치 TFT Touch Shield with 4MB Flash for Arduino and mbed 2015/07/06
400 포인트 투명 결합형 브레드 보드 ( 400 TIE POINT INTERLOCKING SOLDERLESS BREADBOARD - Crystal ) 2015/07/06