IOT 제품 > 라즈베리파이
라즈베리파이 2 / B+ 확장 쉴드 X200 ( Expansion Shield X200 for Raspberry Pi B and 2 )
 

라즈베리파이 2 / B+ 확장 쉴드 X200
( Expansion Shield X200 for Raspberry Pi B and 2 )
 

라즈베리파이 2 / B+ 확장 쉴드 X200 ( Expansion Shield X200 for Raspberry Pi B and 2 )

라즈베리파이 2 / B+ 확장 쉴드 X200 ( Expansion Shield X200 for Raspberry Pi B and 2 )

라즈베리파이 2 / B+ 확장 쉴드 X200 ( Expansion Shield X200 for Raspberry Pi B and 2 )

라즈베리파이 2 / B+ 확장 쉴드 X200 ( Expansion Shield X200 for Raspberry Pi B and 2 )

라즈베리파이 2 / B+ 확장 쉴드 X200 ( Expansion Shield X200 for Raspberry Pi B and 2 )

Introduction
  •  

    The Expansion Shield X200 is a most cost-effective shield which could apply to Raspberry Pi Model B+ and Raspberry Pi 2 Model B. It integrates a lot of very useful functions such as RTC real time clock; audio input and output; VGA output; USB hub; WIFI; 8-way GPIO. With this shield, you can build Raspberry Pi projects more easily and save both time and cost.


    라즈베리파이 2 / B+ 확장 쉴드 X200 ( Expansion Shield X200 for Raspberry Pi B and 2 )

    라즈베리파이 2 / B+ 확장 쉴드 X200 ( Expansion Shield X200 for Raspberry Pi B and 2 )
     
  •  

Specification

  • Input Voltage: 6V to 21Vdc converted to 5V, 3A via step-down DC/DC converter to power the Raspberry Pi
  • VGA output: HDMI to VGA converter supporting up to UXGA (1600×1200) and 1080p with 10-bit DAC
  • Audio: 3.5mm MIC in jack
  • 3.5mm stereo audio jack
  • SPDIF output
  • Audio IO connector (Microphone input and stereo audio amplifier 3.3Wx2)
  • Wireless: WiFi (IEEE 802.11b/g/n) with external antenna
  • IR sensor (38KHz)
  • USB Storage: Self-powered USB hub with 3 ports
  • Real-time clock (RTC): Based on DS3231SN with included CR2032 battery
  • GPIO Control: 8-channel Darlington driver chip (ULN2803) allowing to control electronic circuits which require more current
  • Misc: Power output socket
  • Camera flex slot so camera can still be used with the expansion board attached
  • DIP switch to remove connection from RPi’s pin header
  • Directly connected on top of the Raspberry Pi using the board GPIO header pins
  • No wiring nor soldering is required
  • Duplicated the 40-pin header of the R-Pi in order to support existing expansion boards
  • Suitable for Raspberry Pi Model B+ and Raspberry Pi 2 Model B NEW!
  • Dimensions: 85 x 56mm (Same size as Raspberry Pi)

Note: When you power Raspberry Pi with the shield power resource, please don't power it again via the Micro-USB port, it will damage the board!


Document

드라이버 다운로드 & 유저 메뉴얼



Shipping List

  • X200 Raspberry Pi expansion board x1
  • HDMI adapter x1
  • USB adapter x1
  • 2.4GHz WIFI antenna x1
  • nylon spacers (M3 x 20mm) x4
  • nylon screws (M3 x 6mm) x8

이전글
플랙시블 태양전지 패널 - 2V 1W ( 2V 1W Thin-film Flexible Solar Panel ) 2015/07/15
Flexible 16x16 RGB LED Matrix w/ WS2812B - DC 5V 2015/07/15
다음글
플라이메이플 컨트롤러 ( Flymaple-A flight controller with 10 DOF IMU ) 2015/07/20
Flexi-Strip 디지털 RGB LED 스크립 2m 생활방수 (144픽셀/m) 2015/08/07