IOT 제품 > 전자부품
2.1mm DC Barrel Jack Adapter - Male
 

2.1mm DC Barrel Jack Adapter - Male

2.1mm DC Barrel Jack Adapter - Male

2.1mm DC Barrel Jack Adapter - Male

 


Introduction

  •  

    This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive male barrel jack. If you need to connect bare wires to a barrel jack on an Arduino or a development board, this might be the simple solution.

     

    With this Power Jack, you can feed various power source to your Arduino project, from 9V battery to 6xAA battery. A sample use is illustrated below. The 9V battery clip is also available at


2.1mm DC Barrel Jack Adapter - Male

이전글
EL 와이어 - 네온그린 3mm/3m ( EL Wire - neon green ) 2015/12/14
EL 와이어 - 녹황색 3mm/3m ( EL Wire - green yellow ) 2015/12/14
다음글
파이재단 라즈베리파이 7인치 800x480 터치 스크린 ( 정전식) Raspberry Pi 7 inch Touch Screen Display ( Capacitive Touch ) 2015/12/17
EL 와이어 - 적색 2.3mm/3m ( EL Wire-Red 3m ) 2015/12/17