IOT 제품 > 아두이노
DFRobot CurieNano - A mini Genuino/Arduino 101 Board
 

DFRobot CurieNano - A mini Genuino/Arduino 101 Board

 DFRobot CurieNano - A mini Genuino/Arduino 101 Board

DFRobot CurieNano - A mini Genuino/Arduino 101 Board

DFRobot CurieNano - A mini Genuino/Arduino 101 Board

 DFRobot CurieNano - A mini Genuino/Arduino 101 Board
 


Introduction
  •   

    The DFRobot CurieNano is a small development board based on the Intel® Curie™ module. It is easy to use and perfectly compatible with the Genuino / Arduino 101. The small size will fit your project's development and creation that size matters and makes it ideal for wearable tech and small prototypes.

    This CurieNano is perfect for gesture control, other than curie's build-in 6 axis sensors, the DFRobot CurieNano has added a 3 axis Compass module which make the total sensors up to 9 axis.  Together with Curie's neuron SDK, you can easily let CurieNano to  learn gesture by deep learning neurons.  It is the most powerful board to develop wearable applications. 


    The Intel Curie module contains a x86 quark core and a 32bit ARC architecture core (Zephyr), integrated Bluetooth 4.0 and 6 axis attitude sensor. The module's clock frequency is0 32MHZ and the cross tool chain of Intel can support the development of two cores. The Intel Curie includes dual core storage and users are able to use 196Kb Flash (total 384Kb) and 24Kb SRAM (total 80Kb). It is more than sufficient for most development scenarios with the added bonus of Intel's strong support network to aid your development.


     
    DFRobot CurieNano - A mini Genuino/Arduino 101 Board


     




Specification

     Control Chip: Intel Curie
     BAT Port Power Supply Voltage: 3.5V-6.5V
     5V Port Voltage: 4.5V-5.5V
     3V3 Port Voltage: 2.97V-3.63V
     Digital IO Ports: 15 (including 4 PWM pins D3, D5, D6, D9,)
     Analog IO Input: 6
     IO Port DC Drive Current: 20mA
     Integrated Bluetooth 4.0
     Integrated 6 axis accelerometer and 3 axis electronic compass on board, full inertial navigation
     Onboard boost circuit can provide
1.5A@5v sensor power supply when using lithium battery supply
     Clock speed: 32Mhz
     Compatible with Arduino IDE 1.6.7 or above
     Dimension: 44*24 mm/ 1.73*0.94 inches
     Weight: 6 g


 
Documents



Shipping List

   
CurieNano x1
    XH2.54 pin Header x2

이전글
심장박동 측정 센서 ( Gravity: Heart Rate Monitor Sensor For Arduino ) 2017/01/13
Gravity 아두이노용 아날로그 적외선 CO2 센서 ( Gravity: Analog Infrared CO2 Sensor For Arduino 0~5000 ppm ) 2016/11/17
다음글
아두이노 101/ 제누이노 스타터 키트 ( Gravity: Starter Kit for Genuino / Arduino 101 with Tutorials ) 2017/04/25
Gravity 디지털 적외선 수신 모듈 ( Gravity:Digital IR Receiver Module ) 2017/04/26